The high pressure cleaning heads comprises of a tubular body whose one end may be connected to a hose. The other end of the head consists of nozzles with holes that let out a sharp jet of water. The heads are mostly hemispheric allowing a wide angle for cleaning
The following information should be taken into consideration prior to ordering these high-pressure cleaning heads for tanker truck cleaning.
- The size of the truck
- The substance in the tank to be cleaned.
- Horsepower, gallons per minute, PSI, etc of the pressure washer the cleaning head is to be used with.
- Size of the access area or duct
There are a variety of pressure washers that are used to provide different types of tanker truck cleaning solutions. The heads are designed to clean tanker trucks whose containerâ€™s diameter is or can be a maximum of 15â€™
For large tanker truck cleaning there are power washer heads with maximum PSI up to 2900 and the gallons per minute varying from 52.8 to 2.1. The maximum temperature these heads can withstand is 194Â°F. These outlets of these heads have small nozzles (maximum four) that allow water to flow in pressure. The smaller the nozzles the more is the pressure. The heads are available with a variety of sizes to suit the customerâ€™s needs. The inlet from the hose is either of 1â€ or Â½â€. Some of these serve the purpose of both open and closed containers. There are other heads with lower maximum PSI up to 435. Some of the heads may require to be lubricated from time to time while some do not need lubrication at all. The type of lubrication required could be either oil or wash fluid lubrication. These heads are best used for tanker trunk cleaning of trucks used for carrying chemicals, beverages, pharmaceutical products and food processing material.
The publisher of these pages is in no way responsible for any damage caused to you, your pressure washer, anyone else, your property, or anyone else’s property by trying to implement or by successfully implementing the above-mentioned performance and services.